Specialty coating systems 7406XR


Thermal curing oven by SCS in great condition,

Specialty coating systems inc. 7406XR thermal curing oven product information.

This full line of thermal cure ovens features multiple lengths and heating zones
Details
This full line of thermal cure ovens features multiple lengths and heating zones. The line’s standard unit is the SCS 7406 XR conveyor-style convection heating system, which is designed for cost-effective curing of air cure and heat cure coating materials, including solvent-based and solvent-less conformal coatings. The pin-chain edge-handling conveyor is designed for left-to-right product flow, with oven dwell times between 3.5- and 35-min. at a selected temperature up to 125°C.
The ovens are designed to complement the manufacturer’s Model 4398 selective coating system or they may operate as stand alone units. The ovens’ adjustable width and variable-speed conveyor can handle board from 5.08- to 50-cm wide, and their tunnel height accommodates assemblies with components extending 10.2-cm (4-in.) above or below the conveyor centerline.

The manufacturer states that convection heat transfer covers the width of the conveyor evenly with a standard heater rating of 16 kW, allowing this system to maintain the required temperature and line speed even with substantial thermal loads. Optional additional heating of 8 kW is available in soak zones. Conveyor speed and temperature settings for various assemblies can be called up quickly from memory for production changes.

System features also include:

Standard four-zone explosion resistant convection heating
Stainless-steel internal construction for chemical resistance
Ramp up and ramp down have PID controlled convection heating
Two soak zones re-circulate preheated air only
Full 500-mm wide pin chain conveyor

for further for further inquiries click here
Or send an email to: Info@fixtrade.nl