Philips Topaz Pick and Place

Philips Topaz

Philips Topaz

Pick and Place by Philips, in good condition.

Philips Topaz product information.

***General Specifications***

*Component Packaging:
Tape according to IEC/EIA-J/JEDEC: 8-56 mm Tape reel diameter max: 380mm (15″)

*Manual Tray feeder:
Max. tray size 320 mm x 320 mm (12.6″ x 12.6″)
Optional: Manual tray feeder

*Fixed Manual Tray Feeder:
Max. tray size 635 mm x 136 mm (25″ x 5.3″)
Optional: Fixed manual tray
feeder (Max. board size 250 mm (10″)

*ATS 27 Tray Feeder:
Max. tray size 364 mm x 222 mm (14.3″ x 8.7″)
Optional: ATS 27 tray feeder (Max.
board size 250 mm (10″); second
line sensor camera not possible

*LCS Tray Feeder:
Max. tray size 350 mm x 468 mm (13.7″ x 18.4″)
Optional: LCS tray feeder
(no restrictions)

*Stick and bulk Maximum height premounted components:
6.5 mm on placement side (0.26″)
15 mm on non-placement side (0.6″)

*PCB Dimensions (x,y):
Min: 50 mm x 50 mm (2.0″ x 2.0″)
Max: 457 mm x 407 mm (18″ x 16″) using PCB pin fixation
Max: 440 mm x 407 mm (17.3″ x 16″) using PCB edge clamping system

-Optional 558 mm x 508 mm (22″ x 20″).

*PCB Thickness:
Min. 0.6 mm (0.02″)
Max. 3.0 mm (0.12″)

*Non-mountable area:
-Board Top side:
3 mm from rear side board edge (0.12″)
0 mm from front side board edge
3 mm around reference holes (0.12″) (locate pins)
Component height restrictions apply in the 10 mm (0.4″) area from front side edge depending on board thickness

-Board bottom side:
5 mm from front and rear side board edge (0.2″)
For Ceramic boards (optional) the non-mountable area can be different

*PCB Material:
Phenolic/FR4/Composite Materials Ceramic boards require special conveyor sections (optional)

*PCB Positioning: Locate pin fixation Adjustable
Push up pins Adjustable
Edge clamping Adjustable
Sub stop (PCB waiting buffer) Adjustable

*PCB Transport height:
900 mm ± 10 mm (35.4″ ± 0.4″) Standard
SMEMA 953 mm ± 12.5 mm (37.5″ ± 0.5″) Standard

*PCB Transport direction:
Left to Right Right to Left is optional

*PCB Transport width:
Automatic Front rail fixed and Rear rail adjustable

*PCB Loading time: Approximately 3 sec. PCB loading concurrent to SMD
picking and alignment

*PCB Ratio width/length: Max. 1:3

*Control system: MCX controller 486-100 100 MHz, 16 Mb intern. memory
40 Mb flash disk Optional 85 Mb
1.44 Mb floppy drive 3.5″
RS 232 Serial Interface
15″ Color Monitor
9″ Black/White vision monitor
User Interface: VIOS (Visual Integrated Operating System)
Hand held keyboard for all operator functions
Enhanced PC/AT keyboard for data editing functions

*Control system functions:
Max. 127 PCBs 2280 comp/PCB
Backup and restoring data using RS232 serial line or floppy
Data conversion UFOS«VIOS
Data conversion Text«VIOS
MIS data gathering
Data teaching
Data tracing
Component database 1000 Component packages
Mark database 300 Mark shapes
SMEMA electrical interface
On line calibration
On line help functions
Feeder lock verifier

*Philips Topaz Machine dimensions and weight:
Length: 1655 mm (5.4 ft)
Height: 1865 mm (6.1 ft)
Width: 1358 mm (4.5 ft) Width including feeders 2194mm (7.2 ft)
Weight: 1150 kg (2535 Lbs)

*Safety standards:
Optional mechanical safety package This option is necessary to comply with the European CE safety regulation Electrical safety according IEC 204

*Electric Power:
Voltage AC: 200/208/220/240/380/400/416 V ± 10%,
3 Phase More than 2.5 mm2 cables are needed
Frequency: 50/60 Hz
Consumption: 4 kVA max.

*Air supply: Pressure: > 5.105 Pa (5 bar, 72.5 PSI)
Quality: dust and oil free
Consumption: 350 Nl/min.
Operating temperature: 20 – 30°C (68 – 86°F)
Humidity: 35 – 90% (no dew)

For further inquiries click here

Or send an email to: Info@fixtrade.nl