Nordson Asymtek DS-S-820

Nordson Asymtek DS-S-820

Nordson Asymtek DS-S-820


Precision Batch Semiconductor Dispenser by Nordson Asymtek, as new.
Nordson Asymtek DS-S-820 product information.
Motion System
Type: Brushless DC servo motors, closedloop
with precision encoder
Encoder resolution: 10 microns
X-Y acceleration: 0.25 g peak with S-curve jerk control
Placement accuracy: ±100 µm (0.004 in.), 3 sigma
X-Y repeatability: ±25 µm (0.001 in.)
Z-axis repeatability: ±25 µm (0.001 in.)
Z-travel: 75 mm (3.0 in.)

Dispense Area (1)
350 x 350 mm (14.0 x 14.0 in.)

Tool (z-axis): 3 kg (6.6 lbs)
Workpiece: 2 kg (4.4 lbs)

Vision and Lighting
Vision: Vision system with Automatic
Pattern Recognition
Lighting: Programmable, on-axis, red/blue
LED, 255 light levels

Windows-based laptop PC with mouse

User environment: Fluidmove® for Windows XP
Operating system: Windows XP

Fluid Delivery Method
DispenseJet®: DJ-9000, DJ-9500
NexJet™ System: NJ-7
Auger pump: Heli-flow® DV-7000, DV-8000
Valve: DV-01B, DV-02, DV-03, DV-05,
DV-07, DV-09, SV-100

Facilities Requirements
System footprint: 866 mm wide x 1123 mm deep
(34.0 x 44.0 in.)
Display: Extends 610 mm (24 in.)
Height: 2045 mm (80.5 in.) with light beacon
Complete dimensional diagrams are on the next page.
Air supply: 85 liters/min, 620 kPA
(3 CFM @ 90 psi)
Note: may be higher depending upon application.
Power: 200/240 VAC, 10 amps (max),
50/60 Hz, single phase
Weight: 364 kg (802 lbs)

Other Standard Features:
Advanced process control modules:
Mass flow calibration (MFC)
Calibrated process jetting (CPJ)
Jet-on-the-Fly (JOF)
Dynamic Dispense Control (DDC)
Heated vacuum tooling plate with programmable setpoints
350 x 350 mm (14.0 x 14.0 in.)
Light beacon with audible alarm
Low air pressure alarm with programmable setpoint
Mechanical tactile height sensor
Needle heater control with programmable setpoints
Precision air regulators
Vacuum purge station
For further inquiries click here
Or send an email to: